Manual Rotating ECP with Split Tip for Holes Testing:
- typical absolute single-coil probe built according to the “Single coil” scheme the sensing element of which is built into the split plastic case
- designed for manual testing of holes with a specified diameter range
- applied together with the eddy current flaw detectors Eddycon C, Eddycon CL and flaw detectors from other producers.
Designation |
Tip Ø ‘D’, mm | Working length "WL", mm | Length, mm | Frequency | Connector | Material |
ROM3,1-3,6×85/105SS | 3,1-3,6 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Microdot | Fe/NFe |
ROM3,6-4,1×85/105SS | 3,6-4,1 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM4,1-4,6×85/105SS | 4.1-4.6 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM4,6-5.1×85/105SS | 4.6-5.1 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM5,1-5,6×85/105SS | 5.1-5.6 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM5,6-6,1×85/105SS | 5.6-6.1 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM6.1-6.5×85/105SS | 6.1-6.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM6.5-7.5×85/105SS | 6.5-7.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM7.5-8.5×85/105SS | 7.5-8.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM8.5-9.5×85/105SS | 8.5-9.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM9.5-10.5×85/105SS | 9.5-10.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM10.5-11.5×85/105SS | 10.5-11.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM11.5-12.5×85/105SS | 11.5-12.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM12.5-13.5×85/105SS | 12.5-13.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM13.5-14.5×85/105SS | 13.5-14.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM14.5-15.5×85/105SS | 14.5-15.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM15.5-16.5×85/105SS | 15.5-16.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM16.5-17.5×85/105SS | 16.5-17.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM17.5-18.5×85/105SS | 17.5-18.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM18.5-19.5×85/105SS | 18.5-19.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM19.5-20.5×85/105SS | 19.5-20.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM20.5-21.5×85/105SS | 20.5-21.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM21.5-22.5×85/105SS | 21.5-22.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM22.5-23.5×85/105SS | 22.5-23.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM23.5-24.5×85/105SS | 23.5-24.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe | |
ROM24.5-25.5×85/105SS | 24.5-25.5 | 35/51 | 85/105 | 200 kHz/500 kHz/ 2 MHz | Fe/NFe |
ROM | 3.1-3.6 | x | 85/105 | SS (Sh) |
1 | 2 |
| 3 | 4 |
1. ROM – rotary manual probe for bolt holes testing.
2. Range of tested hole diameters, mm.
3. Probe length, mm, is chosen based on the required working length(“WL”).
4. Probe type designation: “SS”
“S” (Split) – Split end delrin housing, “S”(Single)
Probes of standard type are manufactured unshielded. In case a shielded probe is required, when making an order, please indicate the letters ”Sh” (Shielded) at the end of a designation code. Please specify the required center operating frequency (200 kHz, 500 kHz or 2 MHz).
